Features
* 7.5 minutes of user recordable memory
* Select from user recorded messages or four pre-recorded on-hold pacifier messages
* Three playback options: on demand, continuous, and timed intervals
* Non-volatile memory (no batteries required)
* Built-in 2 watt amplifier to connect directly to speakers
* Record from electret mic, carbon handset, tape, CD, PC sound card or any line level device
* 600 ohm audio output for high wattage amplifiers
* Multiple message capabilities (total number of messages only limited to maximum record time)
* AGC (Automatic Gain Control) for trouble free recording
* Auxiliary audio (MOH) input for between message background music
* Remote trigger input for on-demand playback from a remote contact closure
* Press and hold play mode
* Status LED for record and playback indication
* Master and auxiliary input volume controls
* I.O. communications port (allows only one DVA-2WA to announce at a time)
* One year warranty
* Made in the USA
Specifications
* Power: 120V AC/12V DC, 500mA adapter provided
* Dimensions: 133mm x 89mm x 44mm (5.25" x 3.5" x 1.75")
* Shipping Weight: 1.0 kg (2.2 lbs)
* Environmental: 0°C to 32°C (32°F to 90°F) with 5% to 95% non-condensing humidity
* Frequency Response: 100-3.4KHz
* Sampling Rate: 64K (equivalent) User Message
* Length: 7.5 minutes maximum
* Recording Audio Input Level: 30mV - 1.0V RMS (AGC range)
* 600 Ohm Audio Output Level: 0.3V RMS maximum (across a 600 ohm load)
* Speaker Output Power: 2 watt peak
* Connections: (1) 6-position cage clamp terminal block, (3) 3mm (1/8") audio jacks, (1) handset jack
* Pre-recorded Pacifier Message Length: 30 seconds total
* Minimum Speaker Impedance: 2.66
* Ohms: (3) 8-Ohm speaker |
MY ACCOUNT
MY ITEMS